Concealed Door Restrictor

£8.24 (Exc. VAT)

D/RVL370
Status: In Stock
Ships within 2-3 working days to U.K & Ireland

Quantity Discounts (enter quantity below)
Buy 1+ for £8.24 each (exc VAT)
Buy 10+ for £7.42 each (exc VAT)
Buy 25+ for £6.67 each (exc VAT)
Quantity:
Add To Cart Need Technical
Advice?

Specification

Increase the safety of opening doors – prevent slamming or swinging of the door by fitting this concealed adjustable friction door restrictor. The opening angle can also be altered by repositioning the end cap in the aluminium slide. Manufactured with an aluminium slide, silver passivated arm and die cast frame this restrictor is designed to fit into the eurogroove with 12mm air gap.

  • Fits standard Eurogroove.
  • Adjustable friction control.
  • Connecting arm 3mm thick for extra strength.
  • Variable latching mechanism controlling closing force required.
  • Opening parameters of less than 90 degrees up to 120 degrees on standard doors.
  • All high grade stainless steel on track and arms (type 430 Steel).
  • Simple and easily operated disengagement.
  • Suitable for PVCu, aluminium and timber profiles.
  • Non-handed.
  • Extra frame fixing points for secure fixing.
  • Factory fit or retro-fit.
  • Patent pending.
  • 370mm Length.
 
 

Downloads

Vari-Latch parts Door Restrictor Fitting Instructions

Step 1
Detach the bracket assembly from the arm. Then position and fix the bracket on the underside of the door frame on the hinge side 50mm from the hinge corner and a minimum of 5mm from the front face. Ensure that the bracket release finger pad is away from the hinge corner.

Step 2
Locate the channel into door leaf Eurogroove on the top of the door with the Vari-Latch to hinge side. Reconnect the arm to the bracket assembly.

Step 3
Ensure that the slide is in the locked position. Open the door to the required maximum angle (channel will slide in the Eurogroove) and then fix the channel with screws, minimum diameter 4mm.