Fix All Classic & Crystal

£5.20 (Exc. VAT)

118779
Status: In Stock
Ships within 2-3 working days to U.K & Ireland

  • Select Colour:
Quantity Discounts (enter quantity below)
Buy 1+ for £5.10 each (exc VAT)
Buy 12+ for £4.95 each (exc VAT)
Buy 24+ for £4.69 each (exc VAT)

 

Quantity:
Add To Cart Need Technical
Advice?

Specification

Fix All Sealant is a super sealant, adhesive and filler. Can be applied in all weather conditions (including wet and damp surfaces), internally and externally. A Sealant with No solvents or odours primerless adhesion on most construction materials. A sealant Suitable for sanitary applications and overpaintable with most paints. For all bonding, sealing and filling applications where transparency of the final bond or seal is important. - Fix All Crystal Sealant may be overpainted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. - Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. - Fix ALL Crystal Sealant can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test. - Not suitable for dilatation joints - Do not use in applications where continuous water immersion is possible or in sanitary applications. - Fix ALL Crystal Sealant displays very good UV stability but may discolour in extreme

APPLICATIONS (SEE THE VIDEO BELOW)

- All interior and exterior bonding and sealing applications
- Transparent and elastic bonding in many different construction and 
   building applications
- Invisible bonding of glass and other transparent materials.

   100% Crystal Clear Sealant

-       Primerless Adhesion.

-       Virtually odourless

-       All weather useage

-       Isocyanate and silicone free

-       Mould resistant

-       290ML

 

 

DIRECTIONS FOR USE

Joint dimensions:
- Maximum Width:1mm (connecting joints)
Application:
- Method: Manual- or pneumatic caulking gun
- Application temperature: +5°C until +35°C
Cleaning: 
- Fix All Cleaner immediately after application and before curing

Downloads

How to use Fix ALL® Crystal Sealant

 

As an adhesive

 

1. Make sure the surface is clean, free of grease and dust. To be certain clean the surface with a solvent (Acetone,…).

 

2. Apply Fix ALL® Crystal Sealant on the material you want to bond.

 

3. Press the material you want to fix against the surface.

 

4. After 24 hours 90% of the Fix ALL® Crystal end strenght is reached.

As a sealant

 

1. Remove the old sealant mechanically with a knife and clean the remainders with Soudal Silicone Remover.

 

2. Make sure the surface is dry, clean and free of grease and dust. To be certain clean the surface with a solvent (Acetone,…).

 

3. Place Soudal Tape for Perfect Joints to make sure you will not stain the surface.

 

4. Apply the product evenly in the joint.

 

5. Remove any excess product and smoothen the joint with the Soudal Soudalglatt.

 

6. Leave to cure for at least 24h.